Optimasi Sistem Antrian M/G/C dan Penerapannya Pada Pelayanan Servis Sepeda Motor

Authors

  • Ririn Dehi Universitas Negeri Gorontalo
  • Novianita Achmad Universitas Negeri Gorontalo
  • Ifan Wiranto Universitas Negeri Gorontalo

DOI:

https://doi.org/10.55657/rmns.v2i2.103

Keywords:

Optimization, M/G/C queuing model, Poisson Distribution, General Distribution

Abstract

This study discusses the performance of the queuing system in optimizing service at motorcycle service. This research was conducted at PT. Hasjrat Abadi-Yamaha Gorontalo, the research was conducted by taking primary data for 27 days at 08.00 - 12.00. The variables used are customer arrival time data and customer service time. The results showed that the queuing system at the motorcycle service station is the arrival time distribution, namely the Poisson distribution, while the service time distribution is the general distribution. So the queuing system at the motorcycle service center follows the model (M/G/6)(GD∞/∞)From the calculation of the performance tables of several different servers, it has been found that the performance of the queuing system contained in the motorbike service is optimal using 5 servers. Testing the distribution of arrival time and customer service is carried out using SPSS.25 software.

Downloads

Download data is not yet available.

References

L. Hilier, Introduction to Operations Research, 2nd ed. Yogyakarta, 2008.

S. Sinalungga, Pengantar Teknik Industri. Yogyakarta: Graha Ilmu, 2008.

D. Prayogo, J. Pondang, and F. Tumewu, “Analisis Sistem Antrian dan Optimalisasi Pelayanan Teller Pada PT Bank SulutaGo,” Emba, vol. 5, no. 2, pp. 923–934, 2017.

S. Mulyono, Riset Operasi. Jakarta: Lembaga Penerbit Fakultas Ekonomi UI, 2007.

H. Taha, Riset Operasi, 2nd ed. Jakarta: Bina Rupa Aksara, 2004.

A. Heryana, “Penerapan model antrian M/G/c pada system kehadiran karyawan PT. Dindat Persero,” Universitas Pendidikan Indonesia, 2014.

H. Oktaviyanty, K. Dwidayati, N, and A. A, “Optimasi Sistem Antrian Pada Pelayanan Service Sepeda Motor Berdasarkan Model Tingkat Aspirasi Studi Kasus Bengkel Ahass Handayani Motor (1706) Semarang,” Unnes J. Math., vol. 7, no. 2, pp. 182–191, 2018.

Ferianto. EJ, “Optimasi Pelayanan Antrian Multi Channel (M/M/c) Pada Stasiun Pengisian Bahan Bakar Umum (SPBU) Sagan Y0gyakarta,” Universitas Negeri Yogyakarta, 2016.

D. Purnawan, “Analisis model antrian perbaikan sepeda motor dengan menggunakan program visual basic,” Universitas negeri semarang, 2013.

R. Nurhayati, Rochmat, and Kartono, “Analisis Proses Antrian Multiple Channel Single Phase di Loket Administrasi dan Rawat Jalan RSUP Dr Kariadi Semarang,” Unnes J. Math., vol. 3, no. 1, 2014.

S. Bahar, “Model Sistem Antrian dengan Menggunakan Pola Kedatangan dan Pola Pelayanan Pemohon SIM di Satuan Penyelenggaraan Administrasi SIM Resort Kepolisian Manado,” deCartesiaN, vol. 7, no. 1, pp. 15–21, 2018.

P. Anggi Y. Yundari, and H. Perdana, “Analisis Data Antrian Di Puskesmas Parit Haji Husein 2 Kota Pontianak,” Bimaster : Buletin Ilmiah Matematika, Statistika dan Terapannya, vol. 9, no. 1, pp. 153–158, 2020.

M. P. N. Fadlilah and R. Rahmawati, “Sistem Antrian Pada Pelayanan Customer Service Pt. Bank X,” J. Gaussian, vol. 6, no. 1, pp. 71–80, 2017.

Heizer and Render, Operation Management, 3rd ed. Jakarta: Salemba, 2005.

T. Kakiay, Teori Antrian untuk Kehidupan Nyata. Yogyakarta: Penerbit Andi, 2004.

Downloads

Published

22-06-2023

How to Cite

[1]
Ririn Dehi, N. Achmad, and I. Wiranto, “Optimasi Sistem Antrian M/G/C dan Penerapannya Pada Pelayanan Servis Sepeda Motor”, Res. Math. Nat. Sci., vol. 2, no. 2, pp. 49–56, Jun. 2023.

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)